SPECIFICATIONS
Description
Hydroman® 400TJQ315-50H6A Elecrtic Submersible Sand Agitator Pump for Gold Ore Slurry combines a robust electric motor, a wear-resistant impeller and casing, and a critical additional component: agitator (also called a stirrer or mixer) mounted at the bottom of the high solids submersible slurry pump, directly below the suction inlet.
The agitator for submersible sand pump for gold ore slurry usually a hardened high-chrome alloy blade or propeller—rotates with the main shaft. Submersible gold ore slurry pump built-in agitator generates strong downward and radial currents that break up compacted sand, gravel, ore particles, and settled tailings. This action fluidizes the material into a homogeneous, pumpable slurry with solids concentrations that can reach 50–70% by weight (or higher in optimized setups). Without the agitator, a standard submersible slurry pump would primarily draw water, leaving solids behind to eventually block the intake.
 |
 |
 |
Hydroman low maintenance submersible slurry pumps for 24H operation are typically constructed with high-chromium alloy (such as Cr27 or A05) wet-end parts for exceptional abrasion resistance, dual mechanical seals for motor protection, and IP68-rated enclosures. Power ranges commonly span from a few kilowatts for smaller units to several hundred kW for large mining applications.
 |
 |
 |
Hydroman® 400TJQ315-50H6A Elecrtic Submersible Sand Agitator Pump Design Features That Matter
Modern units often include:
▪ Bottom or side agitators (sometimes multiple side cutters for harder-packed material).
▪ Large internal clearances or recessed impeller designs to pass larger particles (typically up to 50–120 mm depending on model).
▪ Modular wear parts for easier replacement.
▪ Options for flotation platforms, electric hoists, or winches for mobile or pontoon-mounted use.
▪ Temperature and leakage sensors for motor protection.
Some advanced configurations pair the main submersible slurry pump with additional side agitator or water jetring for deeper or more compacted deposits.
 |
 |
 |
Hydroman® 400TJQ315-50H6A Elecrtic Submersible Sand Agitator Pump Applications in Gold Ore Processing
▪ Gold sand dredging. Pumping gold-bearing sand directly from riverbeds, alluvial deposits, and ponds, where the agitator helps lift settled material and the pump transfers it to processing equipment.
▪ Ore slurry transfer. Moving slurry between stages of a processing plant, such as from grinding circuits and sumps to downstream treatment, where steady, clog-resistant flow of dense abrasive material is needed.
▪ Tailings and slag handling. Transferring concentrator tailings and slag slurry to storage or disposal, one of the heaviest abrasive duties in any mining operation.
▪ Sump and settling pond cleaning. Clearing settled sand and slime from plant sumps, settling ponds, and similar collection points where material accumulates over time.
▪ Mineral beneficiation more broadly. The same Hydroman submersible slurry pump system for mine tailings class is used for iron sand, rare earth minerals, and other sand-based mineral processing, so a single submersible dewatering slurry pumps for mining project platform often serves several material streams on a mining site.
Related Pumps
Tobee is specialized in providing solutions for slurry pump, vertical sump pumps, gravel pump, dredging pumps, froth pump, seawater pumps, fire pumps, slurry pump parts and OEM pump parts for your harsh projects.
Top Navigation
Top Navigation
Contact Information
+86 180 3203 4573
+86 311 8722 1317
No. 266, Tianshan St, High-tech Zone, Shijiazhuang City 050000, China.
